Pacific-cycles REACH Rear Suspension maintenance Bedienungsanleitung PDF herunterladen

Reach Rear Suspension Maintenance Manual

S t e p s ：

Use two 32mm open wrench to loosen the

hexagonal bolts in opposite direction (right

side in the photo). Be

careful not to scratch or

damage the surface.

Use 13mm deep socket to loosen the nut

inside.

R e m o v e the nut, stainless steel washer,

aluminum washer and PU washer (shown

from right to left).

Remove the anodized tube.

Remove the nut and washer at the end of the

suspension.

Use 2mm allen key to remove the stop screws at

top and bottom.

Push the axle and PU unit out from left side.

Replace the PU or take the PU out and apply

grease.

1 2

Seite 1

Reach Rear Suspension Maintenance Manual S t e p s ： 1 Use two 32mm open wrench to loosen the hexagonal bolts in opposite direction (right side in th

Seite 2

Note: Apply the grease on a regular basis to make the suspension working at its best. 9 Put the PU unit back. 10 Tighten the stop screws back with

Keine Kommentare

Pacific-cycles REACH Rear Suspension maintenance Bedienungsanleitung